Sub help

I have an old school Sony xm3546 1ohm st@ble and was wondering if I can hook up my 4ohm 12 dvc sub to 2 x 130W @ 4 ohms bridged with just one dvc sub.



These are the specs on the amp




4 x 35W @ 4 ohms (12.5V - 0.04% THD)
4 x 45W @ 4 ohms (14.4V - 0.04% THD)
4 x 50W @ 2 or 1 ohm (12.5V - 0.1% THD)
4 x 65W @ 2 or 1 ohm (14.4V - 0.1% THD)
2 x 100W @ 4 ohms bridged (12.5V - 0.1% THD)
2 x 130W @ 4 ohms bridged

Anyone?

if im thinking right(study for law lol) your options are only 2/8 ohms why you using such a small amp though

That's why I'm bridging it. On the amp ot says bridged then ( mono )

on the manual it says bridging operation 2-8 ohms

4 ohm DVC will get you a 2 ohm load on the amp....as good as its gonna get